FAQs
Click for answer
Where can I find the Windows XP CD for my system?
The CSS Labs workstation comes with a Windows XP System Recovery CD. Check with your IT department.
back to top
Where do I find the system serial number?
Your system's serial number is found on the back of the CSS labs system case.
back to top
PCI PNP IRQ assignment
If you have a system that has more than 4 PCI Slots, it is important that you download the pcipnp.doc file from the downloadable area for a detailed explanation of how to configure and assign irq to pci slots.
Please email Techsupp@csslabs.com for any testing issues.
back to top
Segmented Passive Backplane Power On/Off Sequence
All 2/3 segmented passive backplanes share a common power supply. Switching On or Off from the main switch will boot up all segments. However, if any segment is power down via the segment switch for maintenance, that segment will not boot up until the reset switch for that segment is press. This is because the good power signal is not applied to that segment after the initial system boot.
Please email Techsupp@csslabs.com for any further details.
back to top
Resetting Fault Lights For MaxPro Series
All MaxPro Series 800/1000/1100/1500 have fault lights that may flash upon detecting an error. If the problem is acknowledged and you want to stop the lights from flashing, follow this procedure: Insert the keylock key into the control panel. Turn the key clockwise. Press the reset button, hold down and count to seven. The lights will stop flashing. Return the key to counter clockwise and remove it.
Please email Techsupp@csslabs.com for any testing issues.
back to top
|
